Safari Problem

[GENE EDWARDS]

Has anyone had a problem with the shaft slowly working it's way out of the control box where it locks? If so do you have a fix for this? thanks Gene

 

[psyvad]

This may not be the problem, but that happened with my E-Trac... until I figured out that the cam lock to the lower shaft goes on the bottom, not the top.

 

[TomH]

Gene,

That happened the first time that I used my Safari until I realized that I had not inserted it completely into the upper assembly. It felt like it was all the way in but began to wobble after about an hour's use. I loosened the upper cam and the shaft slid further into the assembly and has not been a problem since.

Hope this helps,
Tom Henrique

 

[zeekeys]

Gene that happened to me too. The shaft came out of the control housing box. I just put it back in and made sure it was all the way in. It hasn't happened again. By the way that is another thing I like about the Safari no shaft wobble....Z

 

[ngrelic]

Same as Tom and Z, shaft came completely out. Reinserted and been rock steady ever since.

 

[Elton]

n/t

 

[Tinfoil]

n/t

 

[GENE EDWARDS]

Heah Tinfoil,

That worked great, Thanks so much. It was getting to be a pain. Thanks again for your help. Gene

 

[Tinfoil]

n/t