I can ship this in a USPS priority flat rate box for $10.70.
Insurance is $2.35. The total will be $138.05.
Used less than 10 hours.
Here is the description from the Sunray site:
Fully compatible with XLT and models using 6.592 khz including Eagle (series), Spectrums, Pro XL, Quantum XT, Quantum 2, 6000 Di Pro, 5900 Di Pro, IDX Pro, Classic ID, Classic I, II & III S/L, etc. ! The XL-1 is precision built to ensure peak performance on those models!
Accurate "bulls eye" pinpointing on coin size targets up to 3"+ deep depending on detector used, settings, ground and moisture conditions!
NEW! Lighter weight, waterproof/submersible 6" X 1" diameter probe mounts on top of upper shaft. XL-1 probe and cable weigh approx. 5 oz. XL-1 switch box, connectors, cable and probe clip, etc. weigh approx. 5 oz. - approx. 10 oz total! (Optional box mount probe clip attachment available for those wishing to mount probe along side of detector control housing - presently available for the slim-line control boxes like the XLT, IDX Pro, etc).
While the XL-1 probe is waterproof the switch box is water resistant and must not be submersed. (We use the same connectors as White's.)
XL-1 incorporates all of the same functions as the stock coil including accurate visual and audible target ID (if the detector model provides those functions) along with identical pinpoint functions! (Depth reading will be off due to the probe's diameter which is normal.)
High quality custom made, durable probe and connector cable used for precision performance. Probe incorporates a very flexible heavy duty custom 30" straight cable with strain relief for "tangle free" operation.
Quality high performance toggle switch used for peak performance! (Minimum 100,000 mechanical life operation-as described in manufacturer's specs)
Toggle switch shuts off coil as it turns probe on and vise versa. Coil and probe are never on at the same time.
XL-1 switch box is conveniently mounted on detector pole attachment in a neutral position (for both right and left hand users) and to prevent toggle from being accidentally switched or bumped by user or damaged by tree limbs, brush, etc. if switch box is brushed or hit during detecting.
No external buzzers, vibrators or lights are needed as all target responses are heard clearly through your detector headphones!
No extra batteries required as the XL-1 utilizes the detectors power source.
Please email any questions to taterdiggr55@aol.com
Insurance is $2.35. The total will be $138.05.
Used less than 10 hours.
Here is the description from the Sunray site:
Fully compatible with XLT and models using 6.592 khz including Eagle (series), Spectrums, Pro XL, Quantum XT, Quantum 2, 6000 Di Pro, 5900 Di Pro, IDX Pro, Classic ID, Classic I, II & III S/L, etc. ! The XL-1 is precision built to ensure peak performance on those models!
Accurate "bulls eye" pinpointing on coin size targets up to 3"+ deep depending on detector used, settings, ground and moisture conditions!
NEW! Lighter weight, waterproof/submersible 6" X 1" diameter probe mounts on top of upper shaft. XL-1 probe and cable weigh approx. 5 oz. XL-1 switch box, connectors, cable and probe clip, etc. weigh approx. 5 oz. - approx. 10 oz total! (Optional box mount probe clip attachment available for those wishing to mount probe along side of detector control housing - presently available for the slim-line control boxes like the XLT, IDX Pro, etc).
While the XL-1 probe is waterproof the switch box is water resistant and must not be submersed. (We use the same connectors as White's.)
XL-1 incorporates all of the same functions as the stock coil including accurate visual and audible target ID (if the detector model provides those functions) along with identical pinpoint functions! (Depth reading will be off due to the probe's diameter which is normal.)
High quality custom made, durable probe and connector cable used for precision performance. Probe incorporates a very flexible heavy duty custom 30" straight cable with strain relief for "tangle free" operation.
Quality high performance toggle switch used for peak performance! (Minimum 100,000 mechanical life operation-as described in manufacturer's specs)
Toggle switch shuts off coil as it turns probe on and vise versa. Coil and probe are never on at the same time.
XL-1 switch box is conveniently mounted on detector pole attachment in a neutral position (for both right and left hand users) and to prevent toggle from being accidentally switched or bumped by user or damaged by tree limbs, brush, etc. if switch box is brushed or hit during detecting.
No external buzzers, vibrators or lights are needed as all target responses are heard clearly through your detector headphones!
No extra batteries required as the XL-1 utilizes the detectors power source.
Please email any questions to taterdiggr55@aol.com