Teknetics Eurotek Pro 8" coil vs N.E.L sharpshooter air test.

[grizzlymint]

I just thought I'd take the time to post these numbers in case someone wanted to see the difference. These measurements are close. Im by no means a expert in the metal detector field. I would like to note that the Eurotek pro has a fixed ground balance.

Air test settings
*Sensitivity @ 10
*disc @ 0
*volume 11

8" concentric stock coil air test

Dime- 4 1/2"
Nickle- 4 3/4"
Quarter- 5"
58 three ringer minie- 4 3/4"
General service button 5 1/2"
U.S puppy paw buckle 8"

N.E.L Sharpshooter coil air test

Dime- 6 1/4"
Nickle- 7"
Quarter- 7 1/4"
58 three ringer minie- 8"
General service button- 8"
U.S puppy paw buckle- 14 1/2"

 

[Youngted]

I am not surprised that the Sharpshooter coil has done well in your test I find its a great coil in every way it Matches the larger T2 stock coil for depth but it is sharper for signals

 

[BarryL]

never did an air Test with mine but I did notice a lot quicker and noticeable response on targets and ID was spot on as well as the depth . I tried very hard when I got a nice signal and checked depth with coil as close to ground as possible and the depth was within a Half inch each time . Also found that pinpointing the target with the Sharpshooter was a lot easier

 

[longbone]

I may be missing something here but it seems like you are saying that the ETP will detect a dime at max of 4 1/2 inches. Mine has no problem air testing a dime at 9 inches .

 

[Mike Hillis]

n/t

 

[Mike Hillis]

This looks like a sales job to me.

My ETPro will easily double all those numbers with the stock 8" coil.

If you are really getting that type of performance then you need to send your detector in for service because it is broken.

HH
Mike

 

[southFLdigger]

This looks like a sales job to me.

My ETPro will easily double all those numbers with the stock 8" coil.

If you are really getting that type of performance then you need to send your detector in for service because it is broken.

HH
Mike

Agreed

 

[Bucksport]

Mine will get those numbers with the sensitivity at 1.

 

[grizzlymint]

Mike,
I hope my intentions didn't come off as a sales pitch. Just thought I'd post that information to maybe help someone out. What kind of readings are you guys getting on air test?