Tips and trick for the XL PRO

[clondike clad]

How about some tips and trick to add on firstontop.com for the XL PRO.
I hope my tips are helping some of you.

 

[poptop]

O.K. Clondike, I will do my best. The meter has a rectangular blank space at the bottom of the lens. I used my word processor to print out numeric meter values on a list of common clad and silver coins to go in that blank space. Used a layer of scotch tape to seal the front of the paper and sprayed the back with spray adhesive. Cut to a perfect fit with a ruler and exacto knife. Pressed it in place like a decal and it looks like the factory did it. Very helpful for old goobers like me with a fading short term memory. If you need or want to remove it....a little "Goo gone" on a soft cloth will do the trick. I noticed that on your site, you are quite clever with electronics. Do a volume control and meter light conversion for us. I'll help with the dummy stuff with paper and tape but I think I'll leave the really cool stuff up to you.

 

[OldeTymer]

n/t

 

[poptop]

No I don't Olde Tymer, but I just used a size 14 standard font in caps and three lines of info for my use. Mine reads like this from left to right and top to bottom row. I worked this out to fill up the space and be easy to see. Hope this helps!

ZINC PENNY 48-50 COPPER PENNY 60-62
NICKEL 28 DIME 62 SILVER DIME 65
QUARTER 74 HALF 80 SILVER HALF 85

 

[OldeTymer]

n/t