White's Classic IDX : Anyone know how to slow the Autotune while in All-metal?

[Anonymous]

I'd like to get as close to non-motion pinpointing as possible!
Thanks!

 

[Anonymous]

hello Marty
interestingly, what differencies has IDX from Classic I-III?
can you share IDX's PCB image?
the autotune you can do even manual...

 

[Anonymous]

kt315,
The pc board on the IDX is almost identical to the Classic III, it even has the same part #, (except for an extra chip or 2 and the connector for the display). I have pictures of them both on my pc at home. I've adjusted the various trimmers, none seem to effect the autotune, only the threshold, LCD display segments, Discriminator and ground balance. What do you do to adjust it? You can e-mail me if it's a secret!!! <img src="/metal/html/tongue.gif" border=0 width=15 height=15 alt=":b">
I've added the power boost and a backlight to mine, a slower autotune would be the icing on the cake!

 

[Anonymous]

Marty, I look the schematics Whites I and III and do not see autotuning... in reality, there is not the part... so it's why I would like to see the IDX pcb.
maybe it will give anything.
but Tesoro, Magnum, Shadow, ETI1500 has the unit, for an example.