Why boost process

[woodchiphustler]

I could not detect these targets except using boost process. Double digit depth. Field hunt, mid minerals , sensitivity 60, boost process, disc 39. Perfect two way signals.

 

[Elton]

n/t

 

[chuck ky]

what were your settings when you tried to detect them in the regular mode.

 

[woodchiphustler]

Sensitivity was set at max, disc lowered to 16

 

[SSCinderCoop]

Amazing finds!!!!!! Boost mode is Beast mode

 

[silverman]

Wow! I just got the Omega 8000. Thank you for the great info. I thought disc 16 was the golden rule. I'm glad it can be raised significantly in Boost. Thanks again for the info, it sure helped this newbie.

 

[hammer0419]

Excellent finds!!!

 

[woodchiphustler]

Don't worry about the id in boost. Just dig all two way signals and be surprised.

 

[tabman]

I first turn the sensitivity up all the way and then turn up the discrimination to control the chatter. I eliminate a lot of trash by doing this and still get really good depth on my Omega and Tesoro detectors . If you think you are discriminating out too much, back off some on the discrimination and then lower the sensitivity to control the chatter.

Give it try.

tabman

 

[woodchiphustler]

Good advice. Since I relic hunt in beds of nails, I lower sensitivity while in boost. 39 disc allows me to hear chopped iron. Runs smooth and deep.

 

[chuck ky]

what type of iron would be detected at 39 if all iron is knocked out at 40. thanks

 

[woodchiphustler]

Larger chunks but the signal comes back one way. I still hit half reales deep with no problem.