Find's Treasure Forums
Welcome to Find's Treasure Forums, Guests!
You are viewing this forums as a guest which limits you to read only status.
Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.
Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.
Click here to register!
Need Support Help?
Cannot log in?, click here to have new password emailed to you
Wide scan colis 5 pin "Where is Center"
- Thread starter Beale
- Start date
REVIER
Well-known member
The scanning field runs down the center, it does not go out to the side like concentric coils, so just make passes side to side.
In pinpointing, the pinpoint tone at the loudest will be not in the center of the coil but just north of where the rod connects to the coil.
The best way to pinpoint in disc is the wiggle and pull back method.
Find the target, keep wiggling the coil keeping the target in the center, when the signal drops out the target will be just under the coil or just behind it if it is shallow, just in front of the coil if it is a little deeper.
In pinpointing, the pinpoint tone at the loudest will be not in the center of the coil but just north of where the rod connects to the coil.
The best way to pinpoint in disc is the wiggle and pull back method.
Find the target, keep wiggling the coil keeping the target in the center, when the signal drops out the target will be just under the coil or just behind it if it is shallow, just in front of the coil if it is a little deeper.