A
Anonymous
Guest
Anything on market to keep 15" coil from tipping back and forth? <img src="/metal/html/confused.gif" border=0 width=15 height=22 alt=":?">
Find's Treasure Forums
Welcome to Find's Treasure Forums, Guests!
You are viewing this forums as a guest which limits you to read only status.
Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.
Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.
Click here to register!
Need Support Help?
Cannot log in?, click here to have new password emailed to you
Changed email? Forgot to update your account with new email address? Need assistance with something else?, click here to go to Find's Support Form and fill out the form.
A
Anonymous
Guest
the new EX2 lower rod has a tendency to notch/eat into the plastic of the rod attachment bracket/support of the WOT when the lower rod and coil are folded for storage or travel (I fold mine when in the car trunk). If you dont pay attention, the rod will put a hole into the WOT.
The XS rod does not do this but needs to be shaved/whittled to fit the EX2.
Ask me how I know <img src="/metal/html/grin.gif" border=0 width=15 height=15 alt=":grin">
The XS rod does not do this but needs to be shaved/whittled to fit the EX2.
Ask me how I know <img src="/metal/html/grin.gif" border=0 width=15 height=15 alt=":grin">
A
Anonymous
Guest
That is good to know! I did find a support bracket made by Birch Engineering. Has anyone used this or know of a dealer that carries them. The one made for Minelab coils will not work on the WOT! Ask me how I know. <img src="/metal/html/lol.gif" border=0 width=15 height=15 alt=":lol">
A
Anonymous
Guest
Sun Ray's option . . . . they have a coil support bracket but I do not know if it works on any coil other than the stock 10.5" coil shown.
Andy Sabisch
Andy Sabisch
A
Anonymous
Guest
[No message]
A
Anonymous
Guest
Thanks Andy and Charles. The WOT did come with two
rubber washer, but size of coil still cause some
problems. I have tighten down coil, but have some fear of stripping the plastic nut.
I think that Sunray bracket may work, if it attaches
to the shaft and not fit on plastic nut holding WOT
on. Need to see a different view of it. <img src="/metal/html/frown.gif" border=0 width=15 height=15 alt="
">
rubber washer, but size of coil still cause some
problems. I have tighten down coil, but have some fear of stripping the plastic nut.
I think that Sunray bracket may work, if it attaches
to the shaft and not fit on plastic nut holding WOT
on. Need to see a different view of it. <img src="/metal/html/frown.gif" border=0 width=15 height=15 alt="
">