Flintstone said:
Hi all XP users, Dose anyone think XP will ever make about a 6 or 7" coil for the Deus ? I hit a spot that had so many targets that the 11" coil could not keep up. Went and got one of my other detectors with 5" coil and pulled out $6.00 or more in change. I know there is more there, just need a small coil and good knee pads.The dirt was from a old pond that had been cleaned out, should be a ring or two there. Will the 6x10 coil that XP is coming out with work on the V3.2 ? Has anyone got information on the new release?
Well,,I don't know what settings you tried,,,but can say,,,higher reactivity can help,,,and if their is can slaw and tabs, etc,,,running high notch will do wonders.
This is actually a secret weapon with Deus... If you don't believe me try the following,,,,take a tab and a dime and place about 1/2" apart,,,sweep in Deus fast and listen,,and watch your meter---- Target will sound like junk and read like junk to boot. Now,, notch 00-80 and resweep the dime and tab combo...the meter reading will be as before,, but check out the difference in the tone,,,a high ringer,,,telling you the dime is there.
This can be applied to other freqs as well--- but notch setting will need to be changed due to lower Vdi on same targets.
You will also notice,,,if you just try to barely notch out a tab for example that reads say 66,,, if you just notch to say 00-70,,, this setting won't straighten out the tone on the tab/ dime combo,,,,instead what you will hear is the Deus actually giving tone on both and blending--- notching 12 points or more over tab will bring in the nice high tone on higher conductor coins.