Menu
What's new
Find's Treasure Forums

Welcome to Find's Treasure Forums, Guests!

You are viewing this forums as a guest which limits you to read only status.

Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.

Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.

Click here to register!

Need Support Help?

Cannot log in?, click here to have new password emailed to you

Changed email? Forgot to update your account with new email address? Need assistance with something else?, click here to go to Find's Support Form and fill out the form.

beachhunter id

any posts from Beach Hunter "all dates" and under BHID too. You will find many good posts about this real nice machine! Good luck with it too!
 
Here's 2 posts I located from the Beach detecting forum.

Posted by: BEACH HUNTER
Date: May 21, 08:06PM

all metal mode use the ID lights to dig or not....any little blink in the red light don't dig..dig all yellow or green and combo targets(ones that give yellow+green together...running it this way gives better depth and better hits on small gold.....use a coil cover and rub the sand with your swings...dig any faint targets that are repeatable even if you don't get the lights to blink..put coil in hole after scooping some sand out recheck id lights. if you learn this detector well you'll be amazed what it can do...good hunting!!hope this is helpfull!!

Posted by: gobble-gobble
Beach hunter ID , Tip for significantly increasing depth
Date: May 31, 08:23PM

This was given to me by my friend who own's the local metal detecting store. A customer was playing around & found this, & it works. GOOD LUCK
1. turn on BHID&go through the normal set up (steps 2 through 4
2.set sens to pre-set with mode switch in disc mode
3. turn threshold control to faint threshold
4.set mode switch to all metal mode & ground balance machine normally
5.after ground balancing & while still in the all metal mode turn sens to max. the threshold will change to a high shrill.
6.hit the reset to return to normal threshold.
7.return to the all metal mode & re-do the ground balance. there will be a narrower window within which to balance at this time.
8.leave the mode switch in all metal mode & begin hunting. there will be a marked improvement in depth.
9. NOTE. there will no longer be tone identification between the targets. however the target identification lights will still be accurate.
 
You must log in or register to reply here.
Top