Find's Treasure Forums

Welcome to Find's Treasure Forums, Guests!

You are viewing this forums as a guest which limits you to read only status.

Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.

Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.

Click here to register!



Need Support Help?

Cannot log in?, click here to have new password emailed to you

Changed email? Forgot to update your account with new email address? Need assistance with something else?, click here to go to Find's Support Form and fill out the form.

Bounty Hunter Land Ranger Pro Ground Balance Modification

iceman382

New member
Ground Balance Switch Modification

This modification corrects an intermittent problem with defective ground balance switch on the Bounty Hunter Land Ranger Pro metal detectors.

Recently, I was having issues with the ground balance front panel membrane switch on the Bounty Hunter Land Ranger Pro.
The switch was not always working properly and would not properly start the ground balancing. It was intermittent at best, and was just not working as it should.

On my previous "pin point" mod Bounty Hunter Land Ranger Pro Pinpoint Modification Pin Point Mod,
I installed two different switches for pin pointing.

To correct the intermittent/defective ground balance original front panel membrane switch, I disconnected the "Green" switch I originally used and hooked the "Green"
push button switch to the circuit board as shown in the pictures. Now the green push button switch is exclusively used for ground balancing.

It works awesome now. Solder "Green" switch to areas that are marked in red.

I hope this helps others. Please see my previous mod for more information and pictures
 
IMG_20190710_162421.jpg
IMG_20190710_165404.jpg
IMG_20190710_165413.jpg
 
Pin Point Modification at....

 
Top