Menu
What's new
Find's Treasure Forums

Welcome to Find's Treasure Forums, Guests!

You are viewing this forums as a guest which limits you to read only status.

Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.

Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.

Click here to register!

Need Support Help?

Cannot log in?, click here to have new password emailed to you

Can tell a quarter from an Aluminun can

A

Anonymous

Guest
My Explorer give the same signal for an aluminun can as for a recent US quarter! Can anyone help?
I have no dealers and apparently no other Explorer XS users to help in my area.
Thank you
 
Sorry my Subject should have read Can't not Can...
Its early here!
 
Often you can tell a coin from a can by the distance your detector picks it up as you raise the loop above the ground. A can will continue to produce beeps at greater distance than a coin. This may not always be the case but it has saved a lot of wasted digging for me.
Fred
 
The simplest thing you can do is get a quarter and a smashed soda can... do some testing with them. Bury them both at 4 inches deep and then sweep each one.... you should notice that the audio signal is more spread out and may warble at the edges over the can and be tighter, crisper over the quarter. Now go into pinpoint and resweep them. Again you'll notice the difference in how the quarter is a smaller signal and the can is more spread out. As already mentioned below, use the smartfind screen instead of digital... I don't ever recall a smashed aluminum can reading the same as a quarter in that mode. Good luck, Mike.
 
Hi,
Thank you for the help....Makes sense to me.
Have a great eveing.
 
You must log in or register to reply here.
Top