Cellar Holes/Foundations

[fsdigital12]

What settings do you guys use when you finally get the lip of the cellar hole and detecting around the foundation?

 

[CZconnoisseur]

There are a few different settings that could be used...if it were me around this part of the country and looking for coins/relics/jewelry, I'd start with this and adjust per the site:

8 or 12 kHz
Full tones
TX 2
Sens 85
Disc 2.0
Reactivity 3
Silencer 0
Overload 1
Notch 02-35, 97-99 if in 8 kHz
Notch 02-42, 98-99 if in 12 kHz
GB 80-85 manual, depending on the site
Ground notch 86-90

Swing slower in higher reactivity to give better separation, anything non ferrous will stand out from the chaff

Some folks don't notch at all, but I run some to keep the detector quieter in trashy areas.
Let the site dictate what changes need to be made on the fly...I use notch starting at 02 to "see" some iron, rather than hear it...the "00-01" will pop up on the display, but there wont be any audio through the phones. Let us know how you get along!!!

 

[fsdigital12]

Thanks man! Will give it a try

 

[Big Boys Hobbies]

Descrim on 5 and iron audio on 2.