Coil Wire for multiple coils?

[Vespaboy]

Hello All!
I have the simplex stock 11" coil and the SP24 coil. The wire on the SP24 has a Yellow/black snakeskinz cable wrap to protect it.
I see that the wires attach both at the control unit and the coil.
Could I just disconnect it at the coil and not switch out the cables?
Are the lengths specific to the coil?
Does wrapping the wire around the shaft act as a phasing coil or can it be straight down?

Thank a zillion.

 

[James/Washington]

You can not remove the coil wire at the coil! It is hardwired into the coil and epoxied in. Trying to remove the coil wire from the coil will destroy both. It makes no difference if the coil wire is wrapped or going straight down the shaft.

 

[Vespaboy]

Looking at it it looks like a nut above an o ring.

 

[IowaRelic]

View attachment 11914

Looking at it it looks like a nut above an o ring.

Yes it is. But it’s a “pass through” not a connector. It cannot be undone.