Find's Treasure Forums

Welcome to Find's Treasure Forums, Guests!

You are viewing this forums as a guest which limits you to read only status.

Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.

Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.

Click here to register!



Need Support Help?

Cannot log in?, click here to have new password emailed to you

CX Plus Master Hunter

Old Katz

New member
Anyone here ever use this machine and also the multiplier with it?
Would one swing the multiplier like one does the coil?

Does it show the DEPTH for the target found with the multiplier?

Katz
 
You don't swing it like you would a typical search coil. You simply let your arm comfortably hang straight down, cradle the handle with your fingers and walk forward. There is no depth indication with Garrett two-box units.

The GTI 2500 Treasure Hound has a feature called Eagle Eye and you do swing it like a normal detector in this case. By holding the pinpoint button on GTI 2500 with two-box unit, it activates this Eagle Eye feature which is just like having a 15" diameter search coil. You wouldn't want to do this far any extended amount of time as it would likely cause your arm to fall off.:biggrin: Happy Hunting!:)
 
I have considered this machine also and am still for a future purchace. Overall how well does it run and specifically the two box setup which is my major interest in the machine. How is the recovery time from bad targets in normal coin hunting?

HH
Jeff
 
Well, you wouldn't really be using a two-box unit for normal coin hunting. These devices are primarily used to search for larger treasure caches buried within a few feet under ground. They are also used to search for larger natural veins of gold or other (hopefully) precious metals.

Single coins and small items as well as metal trash items are essentially ignored and only items that are larger than a soda can(preferably quart sized and up) are detected. No discrimination. Only "all metal mode".

As far as the depth capabilities of the Garrett two-box units. It goes about 3 feet for a soda can. 5 feet for a gallon size target 6-7 feet for an object as big as one meter cube and 20 feet for an automobile size object.

Here is an old field test from Lost Tresure magazine for the Bloodhound two-box unit(comparable to Treasure Hound)

http://losttreasure.com/fieldtests/ArchiveView07.cfm?ID=LT19900636

Hope this helps:biggrin:Happy Hunting!:)
 
Thanks
Maybe I should have asked diffeently.
As a coin and relic machine how does it rate?
How would you compare it to the XTerra705 wich I now am running? I am looking for a complimentary machine with different strengths.
I understand the uses of the 2-box to a degree, but have never used one.

I am trying to figure out if a machine that will run the 2box is what I need, or a seperate 2box and different machine to go along with the XTerra.

Thanks Again
Jeff
 
TURNMASTER said:
Thanks
Maybe I should have asked diffeently.
As a coin and relic machine how does it rate?
How would you compare it to the XTerra705 wich I now am running? I am looking for a complimentary machine with different strengths.
I understand the uses of the 2-box to a degree, but have never used one.

I am trying to figure out if a machine that will run the 2box is what I need, or a seperate 2box and different machine to go along with the XTerra.

Thanks Again
Jeff

Hey Jeff,
The CX Plus is an excellent coin and relic hunting machine. I may be a bit partial towards Garrett, but I must admit that the XTerra705 is a really good machine. In my opinion, rather than simply purchasing a regular two-box unit, you'd get alot more bang for your buck purchasing the CX Plus with Treasure Hound. That way you'll have a very well performing and very deep seeking two-box unit along with a really good back up detector(in the CX Plus). If you really want an outstanding machine with two-box unit, and willing to spend a bit more, then go for the GTI 2500. It is by far the machine that gets the most use from me.

Here's a link to a comparison sheet of the three machines from KellyCo.

http://www.kellycodetectors.com/compare/?a=4

Best of luck to you whichever machine you decide to get. Happy Hunting!:)
 
TURNMASTER said:
Thanks
Maybe I should have asked differently.
As a coin and relic machine how does it rate?
How would you compare it to the XTerra705 wich I now am running? I am looking for a complimentary machine with different strengths.
I understand the uses of the 2-box to a degree, but have never used one.

I am trying to figure out if a machine that will run the 2box is what I need, or a seperate 2box and different machine to go along with the XTerra.

Thanks Again
Jeff
Jeff I used the CXII Master Hunter some few years ago and I recently sold a GMH III. So, I have some passing familiarity with they type.
As a coin and relic detector they are excellent. Some of the best finds I ever made were with the older CXII.
How they compare to the Xterra 705, though, is like apples and oranges. I wouldn't even try to compare them.

As for the two box notion well, it sounds great. It gives you a detector that will find Lafittes buried chests of gold... provided you know where they are. The point is that unless you are looking for a pot bellied stove full of money or a buried 37 Chevy, they seem to be more romance than neccessity.
 
See apples and oranges and some plums thrown in for good measure.

My goal is to ADD a machine not Replace a machine. Ok well I will likely replace my Bounty Hunter with an Ace 250 or XT305 so my kid can can have the fun too.

What I am finding is the XT 705 likes to be moved faster to hit deeper coins. That bugs me in the trashy or nail infested sites. I want to slow down in that circumstance, and I know that technique can over come some of that prob along with a smaller 6"DD coil.
All I am saying is that it would be nice to have a second machine that would fit that ticket and hit that extreme depth also,
I really want to hit that fabled giant can of money, just like every one else. They are out there and it does happen occasionally. My buddies uncle....

Rummers are based in fact often times.

I am still a newb and am researching some options before I make my next big (for me) purchase. Next spring?
My first machine was a cheap intro to see if I would enjoy the hobby. 300$ machine for 122$ brand new at Cabellas. Took two weeks to figure out I was enjoying myself and way under gunned.

Having fun
Jeff
 
TURNMASTER said:
All I am saying is that it would be nice to have a second machine that would fit that ticket and hit that extreme depth also,
I really want to hit that fabled giant can of money, just like every one else. They are out there and it does happen occasionally. My buddies uncle....

Having fun, Jeff
Well, they have been uncovered but you gotta look at this as a game of odds, where the odds are against simply lucking up on one. Its kinda like the lottery, which is really just a tax on the poor... and those who are poor at math.

Now, you can change to odds, slightly. Lets say you have learned of some buried treasure... say a stash of money from some old miser who died before he could divulge its location. And lets say you have the inside track and have learned of it before anyone else, of course. Then you determine through research it's location within, say, 50 square yards. Then you secure permission to search for such a treasure wherever it may be. Now, that is a possible candidate for a two box unit. Added all up, those are some long odds and will test your resolve and optimism. Few of us are Mel Fisher, after all.

This is why I daresay the average Detecting Joe is hardly gonna use a two box very much. Its unlikely you'll find a bank robber's forgotten cache down at the local soccer field, or on the sand filled beach. It's remotely possible of course, but it's hardly worth lugging the thing around on the off chance, you know?

However, having a detector that offers the option like the CX Plus, is a different matter, as you suggest. It is a good detector in it's own right, deep seeking and full of useful options, so no worries there. You will have some ergonomic adaptations to work through with it, though - it is NOTHING like the Minelab you are used to. So be ready for that... apples and oranges. But none of the other makers have a detector that has the two box option.
So, if you have the Garrett and run into the right circumstances, either through determined research or luck, you can purchase the two box unit and have at it. That's the way I suggest you approach it, anyway.

I would suggest you seek a used CX model, if you can. They go for $300-$400, depending on the vintage and many people sell them because of the ergonomic issue. They either love them or hate them and often sell them in quite good condition. I sold a nice GMH CXIII last spring for $300, which would have been perfect for you.
Be certain that whatever model you get, has the arm rest intact and fully functional... take my word for that. Garrett also remains in service mode on the more recent CX detectors, although it is wise to check with them on older models.
 
See that is what I am talking about.
I believe you make your own luck.
Don't get me wrong some people fall @ss over teakettle into good luck all the time. Just not me.

Luck for Me has always been a combination of...
Preparation, Perseverance, and Hard Work.

God blesses people differently and that is how He blessed me!

Hear a story check it out. Chase down a lead. Do some research. HAVE SOME FUN.

So as I have gotten into this hobby I approach it with that same attitude. Education is part of Preparation.
And besides you have got to have a dream and a plan.

Thanks Guys
Jeff
 
Top