CZ5 problem

[ken(toronto)]

The coil cable that connects to the control box is faulty.
Seems there's a breakage somewhere near the connector that plugs into the control box. I opened up the plug, and all the wires are soldered solidly, so me thinks there's a broken wire in the cable. I'm pretty certain of that because I always chest mount the control box with the Fisher chest-mount, and that puts pressure on the cable where it's connected to the control box.

Has anyone encountered this problem?

Where can I get a new plug, so that I can cut off a piece of cable and re-solder to the new plug?

thanks

Ken

 

[tvr]

Ken,
I could have sworn I had the part numbers for the connectors to convert a CZ6 to a CZ6a; but I am not finding my reference file with that information. If I run across it, I'll put the part numbers up.

Hopefully someone else has the information too!
tvr