HanoverDigger
Well-known member
Got tired of the detector tipping over so I looked online to see how to build a stand. Spent $4 on parts and about a half hour to assemble. Works great!!
Find's Treasure Forums
Welcome to Find's Treasure Forums, Guests!
You are viewing this forums as a guest which limits you to read only status.
Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.
Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.
Click here to register!
Need Support Help?
Cannot log in?, click here to have new password emailed to you
Detector stand for the T2
- Thread starter HanoverDigger
- Start date
HanoverDigger
Well-known member
n/t
HanoverDigger
Well-known member
Got the idea from this. Two 3/4 Tees, two 90 degree ells, and a short piece of pipe. All pvc, which can be purchased at the Home Depot or Lowes for under $4.00. I didn't see the need for the caps. It sets up and balances off the ground fine.
HanoverDigger
Well-known member
Just have to give it a coat of paint.
HanoverDigger
Well-known member
Forgot to add that I glued a thin piece of clear vinyl into the cutout portion of the tee and gave a few wraps of electrical tape around the shaft to avoid scratching. This gave it a snug fit and I did some more tape for added stability.
