Find's Treasure Forums

Welcome to Find's Treasure Forums, Guests!

You are viewing this forums as a guest which limits you to read only status.

Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.

Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.

Click here to register!



Need Support Help?

Cannot log in?, click here to have new password emailed to you

Changed email? Forgot to update your account with new email address? Need assistance with something else?, click here to go to Find's Support Form and fill out the form.

Disc. @ 5

RonNH

New member
I started running my machine in Disc. 5 yesterday just to try it. As some may know, this puts the machine in a High Gain mode and I had to throttle down the Sens. to 65-70 or it spazzed out. I was running it in 10-15 Disc. and 75-85 Sens before.

The nice thing about the High Gain is it gives you something to listen to between targets as it picks up more ground minerals. The iron gives a lower grunt and the good stuff sounds more crisp, not muddy as before.My settings for fields is now De or Pf, Notch 1, Disc. 5, Sens. 65-75 and 2 Tones. I didn't like the 3 or 4 Tones as it was giving me a high tone too often and I had to re-swing over a target to check it. I can tell when I have hit something good in 2 Tones by the intensityof that higher tone. The F75 has a bit of a learning curve but that's the case with all deep seeking machines. The more I use it, the more power I can give it and I reckon I'm still running it at only half it's potential. RonNH
 
Top