Does any body know were to get the yellow knobs

[RONC(OR)]

for the excal I only need one for the threshold its the only one I use most of the time HH RonC

 

[tomcatpl]

http://cgi.ebay.com/MINELAB-EXCALIBUR-REPLACEMENT-CONTROL-KNOB-CAP-NEW-/400074538702?pt=LH_DefaultDomain_0&hash=item5d264cfece

 

[erikk]

send me your info I will send U them free but I use these

 

[RONC(OR)]

ThX erikk

 

[muggsc]

Sorry, I didn't catch that. Where?

 

[Neil]

send me your info I will send U them free but I use these

Those look good erikk, where can someone get them?

 

[erikk]

Those come from Radio Shack I then removed the cheap aluminum insert. colored the inside with some yellow paint that I use for fly tying and covered the top with epoxy when dry. I replaced the slotted brass screws with stainless Allen head set screws. Inexpensive, will never slip and easy to move with wet hands

 

[muggsc]

Niiiicce! Thanks erikk!

 

[John(Tx)]

I'm afraid to break something since they seem to be really tight, did you just pry them off? Thanks, John

 

[erikk]

Pop yellow cap with jack knife, unscrew small brass nut with NN pliers place blade under knob, lift and they come right off Walk in the park

 

[John(Tx)]

n/t