F70 meter cover?

[JASONSPAZ1]

Besides buying an F75 meter cover and cutting holes to see the buttons on an F70, does anyone make an exclusive F70 meter cover?

Thanks in advance
Jason

 

[morelic55]

I found that the Xterra cover works if you relocate where the coil plugs in. Not a real tight fit, but it works other than using samich bags

 

[JASONSPAZ1]

Thanks. If you could, explain what you mean by reloacating where the cable plugs in?

Thanks
jason

 

[dahut]

I use camouflage duct tape and thin foam sheet.

 

[morelic55]

The cable on the Xterra is center in the cover whereas the F70 cable plug hole is of fcenter

Thanks. If you could, explain what you mean by reloacating where the cable plugs in?

Thanks
jason

 

[cometguy]

Hi cut a piece of cardboard or paper for the pattern and then cut one out of vinyl I got at wallyworld. The vinyl will stick like cement with a little touch of moisture and pressure to iron it down. It goes over the buttons and protects the screen. It is cheap enough you can replace the cover when ever you feel like it too.

Don

 

[dahut]

Hi cut a piece of cardboard or paper for the pattern and then cut one out of vinyl I got at wallyworld. The vinyl will stick like cement with a little touch of moisture and pressure to iron it down. It goes over the buttons and protects the screen. It is cheap enough you can replace the cover when ever you feel like it too.

Don

I do the same. Any thin clear acetate will work, as well.