SavingThePast
Member
Hi all,
Since buying a ctx and even though its killing me to do so, I have decided to sell my one off atpro. I purchased this new from nwi detectors on 10/28 so it still has tons of warranty left. It is still like new and has only been used for less than two hours which was to help a farmer find a piece to his plow out in a field one morning. I will include a link to my previous thread of the mod that has been done which in my opinion is the way garrett should have made the headphone connection in the first place. The best thing about the mod is it is not permanent and still unscrews at the head unit. The insides of the machine have not been touched so the warranty is still in place. If you want to go back to the original headphone connection you can just buy a new upper shaft from garrett for $19 and be back to the completely stock setup. It is the 50th anniversary pack which includes the 8.5x11 and the 5x8 coils both with coil covers. It also includes a brand new set of the auvio 33-283 wireless headphones which connect at the rear so no crazy in line volume controls or anything are needed and is a very clean setup. The connector at the rear is the same as the ctx and completely waterproof so you can use any of the available waterproof headphones for the ctx and still be completely waterproof. I am also including a male ctx hp connector so you can install it on any headphones you currently own or whatever you wish. I am also including the stock hps which have never been used but they no longer have the connector on the end because I needed that for the shaft mod. You could also attach the included ctx connector to the end of those if wanted(I recommend using it on a nicer set though). Everything shown in the photos below is included. The detector face has no scratches and is still like new also. The 5x8 is new and hasn't been used. I included a photo of the bottom of the coil cover on the large coil and although the cover does have a few scuffs you can see just how little it was used. Here is a link to the thread of the modification....
http://www.findmall.com/read.php?79,2117711,2118107#msg-2118107
I am also including a copy of the receipt, garrett hat, manual, dvd, box. This setup is awesome and if I didn't need to recoup funds from the ctx purchase it wouldn't be going anywhere. I am asking $650 shipped(will consider offers)by paypal or usps money order and only ship inside the USA. I may be interested in a partial trade if you have a lower rod for the ctx and/or a ctx specific minelab carry bag.... If you have any questions don't hesitate to shoot me a pm.
Thanks for looking!
Since buying a ctx and even though its killing me to do so, I have decided to sell my one off atpro. I purchased this new from nwi detectors on 10/28 so it still has tons of warranty left. It is still like new and has only been used for less than two hours which was to help a farmer find a piece to his plow out in a field one morning. I will include a link to my previous thread of the mod that has been done which in my opinion is the way garrett should have made the headphone connection in the first place. The best thing about the mod is it is not permanent and still unscrews at the head unit. The insides of the machine have not been touched so the warranty is still in place. If you want to go back to the original headphone connection you can just buy a new upper shaft from garrett for $19 and be back to the completely stock setup. It is the 50th anniversary pack which includes the 8.5x11 and the 5x8 coils both with coil covers. It also includes a brand new set of the auvio 33-283 wireless headphones which connect at the rear so no crazy in line volume controls or anything are needed and is a very clean setup. The connector at the rear is the same as the ctx and completely waterproof so you can use any of the available waterproof headphones for the ctx and still be completely waterproof. I am also including a male ctx hp connector so you can install it on any headphones you currently own or whatever you wish. I am also including the stock hps which have never been used but they no longer have the connector on the end because I needed that for the shaft mod. You could also attach the included ctx connector to the end of those if wanted(I recommend using it on a nicer set though). Everything shown in the photos below is included. The detector face has no scratches and is still like new also. The 5x8 is new and hasn't been used. I included a photo of the bottom of the coil cover on the large coil and although the cover does have a few scuffs you can see just how little it was used. Here is a link to the thread of the modification....
http://www.findmall.com/read.php?79,2117711,2118107#msg-2118107
I am also including a copy of the receipt, garrett hat, manual, dvd, box. This setup is awesome and if I didn't need to recoup funds from the ctx purchase it wouldn't be going anywhere. I am asking $650 shipped(will consider offers)by paypal or usps money order and only ship inside the USA. I may be interested in a partial trade if you have a lower rod for the ctx and/or a ctx specific minelab carry bag.... If you have any questions don't hesitate to shoot me a pm.
Thanks for looking!
