Find's Treasure Forums

Welcome to Find's Treasure Forums, Guests!

You are viewing this forums as a guest which limits you to read only status.

Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.

Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.

Click here to register!



Need Support Help?

Cannot log in?, click here to have new password emailed to you

Changed email? Forgot to update your account with new email address? Need assistance with something else?, click here to go to Find's Support Form and fill out the form.

high gain and normal or low gain and sharp? which go deeper?

BetaGod

Member
Hello guys.. for relic hunting is better going with a powerlfull timing like sharp and go down with rx gain for let the gpx stable or is better going a less powerfull timing like normal and going with a higher rx?
 

Tony

Member
Sharp and Normal timings generate a more powerful transmit field.....so yes, go for these timings and then adjust gain and other settings as needed. This principle works well for gold prospecting, assuming the ground isn’t heavily mineralised then the more powerful timings are the way to go.
Tony
 

Tony

Member
Sharp with the lowest gain will be more advantageous than Normal with the highest gain.
If you can run in Sharp with little ground noise then most likely you can run a decent gain as well.......the limiting factor might be EMI in which case you may need to drop the gain. Sharp is a very powerful timing, Normal isn’t far behind. Experiment and see what you can get away with....start with the power settings and adjust downward if needed. The detector will tell you if it isn’t happy 👍
 
Top