So the other day I took my stock coil from my Diablo 2 (elliptical) and put it on my Vac. Air tested on coins worked real good (10-14 in on misc coins) nickles disc out well before the 5c mark , don't know why yet
Today I went to the tot lot and ran it just above iron, It was very very sensitive found the smallest silver ring ever @ 3in , what I mean by ring is the small round piece that the clasp attaches to. No necklace though
At this small sanded tot lot I had just ran the Sand Shark over the whole area, got as much stuff as I could hear, rusted screws, bolts, hair pins coins, even a staple ect.. so I knew there couldn't be to much left, with the Vac the ring was faint but repeatable, I also found the dreaded foil pieces.
I have found small pieces of natural gold with the Diablo 2 but have not found such a small piece of (good) metal with the Vac
If you want to micro detect try this set up
Today I went to the tot lot and ran it just above iron, It was very very sensitive found the smallest silver ring ever @ 3in , what I mean by ring is the small round piece that the clasp attaches to. No necklace though
At this small sanded tot lot I had just ran the Sand Shark over the whole area, got as much stuff as I could hear, rusted screws, bolts, hair pins coins, even a staple ect.. so I knew there couldn't be to much left, with the Vac the ring was faint but repeatable, I also found the dreaded foil pieces.
I have found small pieces of natural gold with the Diablo 2 but have not found such a small piece of (good) metal with the Vac
If you want to micro detect try this set up
Nice to see your post as my 5x10 wide scan DD for my Vaquero arrived today. The discrimination mode does not seem to work as well with the DD so I will be listening closely to the shape of the sound. Coil seems very sensitive in my air tests. The main reason I bought it was to be able to hunt on hot soil and wet salt beaches. I am a little confused on the pin pointing as it is not acting as I thought it would. From what I read a DD coil puts out a signal in a straight line in this case from the heel to the toe of the elliptical coil ??? Do I just use the heel and toe for pin pointing? I was not expecting it to sound off as soon as the side edges of the coil passed over a target but only when the center axes of the coil passed over the target. Well some one will straighten me out:confused.