Menu
What's new
Find's Treasure Forums

Welcome to Find's Treasure Forums, Guests!

You are viewing this forums as a guest which limits you to read only status.

Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.

Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.

Click here to register!

Need Support Help?

Cannot log in?, click here to have new password emailed to you

I am so excited!

S

SkiWhiz

Active member
I just received an email stating that my money order was received today and I should have my brand spanking new X-Terra 30 for this weekend. I can't wait, it will be my first Minelab detector. I have some coins & ojects planted in the yard to get a feel for the machine when I get it, then it is off to the parks & school grounds. Yee haw! Steve.
 
Well I hope you do get it before weekend. If you are going to try for maximum depth in your test garden then may I suggest the following.

Get the machine put together, walk in back yard, turn on and run sensitivity all the way up in All Metal mode. Hold the machine rod so coil is waist high and parallel to the ground. Check to see if there is any interference noted with coil at waist height. If yes lower Sens down to quiet it.

If not find a piece of ground free of targets. Bobb the coil from 1 inch to 10 inches above ground several times and listen for any audio reports, or any phantom responses on the screen which are generally negative numbers. If no response then swing coil back forth over a target free area to see if the machine responds to the ground. If yes lower Sens until it doesn't. Now conduct your tests.

If you head to another geographic location repeat the above procedure. It will help you set the Sens as high as possible, with one caveat, in high trash areas turn it down to get the best response.

HH
BarnacleBill
 
Thanks for the info BarnacleBill, I will do that. Normally with my other detectors I have had - I crank up the sens. to where it gets chirpy without movement, then back it off a touch. Thanks! Steve.
 
You must log in or register to reply here.
Top