minelab explorer se digital numbers for coins

[banditicey]

Hello
i have been detecting for two years but is new to the minelab explorer se.
i need anyone out there who has a list of the numbers that correlate to coins and jewelry
for the digital numbers on the se to send a copy to me and save my sanity.
thank you

 

[dewcon4414]

Go to WWW.findmall.com/read.php?10,922673 Magicman posted them some time ago. Right now while you are new id learn the tones and smartscreen. The digital numbers might be ok to check a target with, but way to jumpy to hunt with any reliability. Most of the good coins will hit in the upper right QUARTER of the screen. You can run some clad coins over your coil and get used to the tones. Silver will position a little different ... but not much. Try borrowing some older coins from a friend or get some CHEAP ones from a deal with no dates. As far as jewelry.... well silver is easy it hits in that upper quarter as well, but gold is all over the place. Most that i find is from foil to just above the nickel. There is a program for jewelry in the machine.... take a look at where it says jewelry falls. Its pretty close. There isnt a lot of shortcuts to good finds. You are going to have to DIG and learn what targets sound like shallow and deep. Once you learn the tones.... its location location.

Dew

 

[teleman2525]

got a odd number on the se today 3-30 nice tone but seemed close to high iron numbers but nice location on smart screen and nice tone all said dig me glad i did 1894 s barber quater numbers are ok but only part of the whole the se rocks use it all its there for you

 

[banditicey]

thank you for your reply
you confirmed stuff i thought i knew and sent me to a good source
i may sound pitiful but i still managed to find a 1907 Barber half more than 10 inches down but im not sure i can remember and do it again
regards, eva

 

[teleman2525]

just remember ir it sounds good dig it numbers not always right nor is the smart screen always smart but tone is pretty good most times