I was trying to figuare a way to keep the weight of my Sunray probe as close to my arm as possile. I noticed that it's thickness was the same as the distance between the White's stand and the bottom of the control box. Next improvement is to mount the probe on the side of the control box. I took off the mounting (to mount to down tube) and mounted the switch box to the control box with double sided tape so it culdn't slip out from under the stand.
[attachment 55218 P4280980b.jpg]
[attachment 55211 P4280978.JPG]
[attachment 55218 P4280980b.jpg]
[attachment 55211 P4280978.JPG]