Find's Treasure Forums

Welcome to Find's Treasure Forums, Guests!

You are viewing this forums as a guest which limits you to read only status.

Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.

Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.

Click here to register!



Need Support Help?

Cannot log in?, click here to have new password emailed to you

My new T2 SE

all iron

Member
Yes, I did it to! Thanks to Bart at Bigboyhobbies.net
I couldn't be more satisfied with this machine / came with the 5 inch coil also.

About 2 years ago i buried a quarter in the back yard right at 11 inches and the detector i had at the time could not find it, so i thought the ground would settle and i would find it latter.
Well that never happened and i lost track of where i buried it exactly, all i new was approx. where i had buried it.

That all changed the other night when i popped the batteries into my new T2 / there was no doubt where it was again.

Thanks again Bart for the great deal and fast shipping

I took it out this weekend to a favorite old spot that has no new trash only old trash :pulltab:

Once i got there, i turned on the detector
set the discrim at 51
switched back and fourth from 3 tones and boost mode
ground phase at 66
hum level was at 1+
sensitivity at 75

My very first target was a ring!, i could not believe it!!

Here is a link to my first hunt with this machine

http://youtu.be/XK9AsryL_us
 
good job on the video thats a awsome first day , im a new t2se owner also .look forward to seeing more videos hh
 
Nice vid. Glad you are liking your T2. I got a new one coming wensday on the brown truck. Wish me luck. HH
ric
 
do you change the hum level in all-metal. i've never seen that listing i never hunt in all-metal. does it carry over to the disc. mode. thanks
 
That's a good question, i don't think it carries over into disc, but i like to set up both search modes in case i switch plus, i'm new to this machine so i will teak the settings until my ears hurt
 
i tried it today and there's no hum level in disc. just the noise you get when you hit the boost levels or have the sen. too high
 
Stopped after work and found a 1936 s Mercury dime in the same hole as a rifle casing
dug out the casing first and then rechecked tho hole

I could here both targets or at least i thought i could

sensitivity 80
discrim 52
ground phase 70
3 tones

awesome!

and i thought i bought it to find relics
 
today i went back to the same spot after work and dug up 3 merry widows condoms containers
There must of been a whole lot of somethin goin on.
 
I would say your disc is to high try 30 - 35 and dig the grunts that could be good iron or very deep relics coins ect
 
Top