need help. how to remove camlock?

[vito]

Hello.
Hopefully this is the corect forum to ask for help as this question is related
to White's detectors and gear.

I know I've seen this some time ago at a friend who replaced his camlock to
get it stronger while the lock, the white part inside the tube, was new.
But how do I losen the old camlock. I know they are two parts, that black outer one.
Any tips on how to separate the parts???

 

[vito]

Got it.
It's done very easy.
Changed the camlock at the detectors end as it wasn't close enough
and the stem was a little bit flimsy.
Now it is like new.

Good Luck & Happy Hunting

 

[dirt doctor]

Glad it worked out for you Vito !

 

[vito]

Glad it worked out for you Vito !

Thank you for your response dirt doctor.
For me it really worked. Still have some older parts from detectors
in my basemant and so I had no charge and the parts still do the
job on my current detectors.
There is one thing to mention, the camlocks used on the rods and the
IDX / M6 style electronic housing rods have different diameter than the
camlocks used on the MXT (Pro) / V3 style electronic housing rods.
Hope this will help someone else, too.

All the best & Happy Hunting

[attachment 361244 C1.jpg]

[attachment 361245 C2.jpg]

[attachment 361246 C3.jpg]

[attachment 361247 C4.jpg]

[attachment 361248 C5.jpg]