HanoverDigger
Well-known member
Nothing spectacular but was impressed with the depth on the umbrella piece. Well over a foot deep and gave a good signal. The rest were at 4 to 8 inches. Thanks for looking.
Find's Treasure Forums
Welcome to Find's Treasure Forums, Guests!
You are viewing this forums as a guest which limits you to read only status.
Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.
Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.
Click here to register!
Need Support Help?
Cannot log in?, click here to have new password emailed to you
Old homesite finds with the Nel Hunter coil
- Thread starter HanoverDigger
- Start date
HanoverDigger
Well-known member
Sorry...my bad. I use the T2SE.
cedarswamp
Active member
n/t
cedarswamp
Active member
Its been a while that I couild hunt with two foot of snow and going down to -15 tonight does anybody from the south want to host a t2 user from the north LOL thinking of getting the hunter coil myself heard alot of good reviews.....CEDAR
cedarswamp
Active member
White out !
are the settings you were using on that search? How low was the Discrimination?
Is there a typical Disc. setting you usually use?
How about the use of a 1 or 1+ TONE audio Vs 2+ Tone ID, or any multi-tone option?
Were the targets shown in the photo located in a somewhat scattered manner, or were they close to, and mixed in with, iron or ???
Inquiring minds like to know what the settings used were as that's just as important, or more so, than the make/model and search coil used.
Thanks, and I know others might wonder the same things but just not ask.
Monte
Is there a typical Disc. setting you usually use?
How about the use of a 1 or 1+ TONE audio Vs 2+ Tone ID, or any multi-tone option?
Were the targets shown in the photo located in a somewhat scattered manner, or were they close to, and mixed in with, iron or ???
Inquiring minds like to know what the settings used were as that's just as important, or more so, than the make/model and search coil used.
Thanks, and I know others might wonder the same things but just not ask.
Monte
HanoverDigger
Well-known member
All the targets were scattered about. I normally hunt in all metal, 90-95 sens. in bp. This site is loaded with iron so I had the disc. at 40, 85 sens. in bp. The targets had no iron mixed in, but the brooch looking piece had iron all around it. I haven't used the other tones as I really like the boost process.