Menu
What's new
Find's Treasure Forums

Welcome to Find's Treasure Forums, Guests!

You are viewing this forums as a guest which limits you to read only status.

Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.

Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.

Click here to register!

Need Support Help?

Cannot log in?, click here to have new password emailed to you

? on coil cable

A

Anonymous

Guest
Iam going to have the coil cable on my 2 sov coils cut to lenght.Now the big question is can I re-use the coil connectors?I have a S12 and a 7.25 BBS coil.Now before I get the electronic shop to chop them is there anything else I need to know,except cutting them too short.Now if I can"t re-use the connectors where can I buy "em.I have to also cut a piece off of my DTI 3 meter(cause it broken near the connector and it falses like crazy when I move it from left to right)) is this connector also re-useable?Thanks Marc
<img src="/metal/html/smile.gif" border=0 width=15 height=15 alt=":)">
 
It is just a matter of resoldering the harness to the connector, your other connector is reusable too....Geo
 
if I wanted to lenghtened the cable in the future I wonder if a splice with connectors would do?Thanks again...
 
as long as the solder points were good, probably a better solution would be to make an extension cable with the proper connectors on both ends, so save the cable length that you remove for that purpose, once the shop where the work is being done sees the type of connectors used, they could get you some or make the cable up for you...HH..Geo
 
Radio shack carries them and a lot of other stores on the internet. I bought a bunchfrom a supply house for music equipment. I believe they are called microphone connectors.
 
Hey Marc, I cut 50" from both my 8" & 10" coils. Left my WOT full length for water hunting. I reused the same connectors. You don't need to bring those to an electronic shop. Invest in a solder gun <img src="/metal/html/grin.gif" border=0 width=15 height=15 alt=":grin"> <img src="/metal/html/tongue.gif" border=0 width=15 height=15 alt=":b">
 
a solder gun and flux ..s if I frig it up can I go cry on your shoulder??LOL..do you still have them pics of the colour code for the wires ?Email me your home # will give you a call
<img src="/metal/html/biggrin.gif" border=0 width=15 height=15 alt=":D">
 
I cut the wires at the conector and left some of the wire with the color on them, so I could desolder and resolder one at a time and knew where they went.If using new conectors it still will work as you know where each color went as the pins are numbered.
Rick
 
You mean theses <img src="/metal/html/glasses.gif" border=0 width=15 height=15 alt=":geek:">
<center><img src="http://personal.nbnet.nb.ca/bear71/ultrazoom0046.jpg">
<center><img src="http://personal.nbnet.nb.ca/bear71/ultrazoom0047.jpg">
 
You must log in or register to reply here.
Top