kaolinwasher
Well-known member
this moring I got out to a sports field, to look for Gold and i decided to use the Gold 1 program, and it worked very well ,I could tell the iron ,the junk foils,and was digging numbers from 47 and up . I did not find Gold but the way it handled most targets was really great I found the small buckle at 8"+ with a good signal 93-95 the way I had it set up is Gold 1 ground balanced then put it in 15.2 KHZ a reaction speed of only 1 so you need to swing slower but it goes deep , i used a 85 gain and set the IAR to 4 what i like is the iron comes thru with a nice low tone and the aluminum and brass higher tone you have to swing slow or the targets may crackle like Iron , but with the higher KHZ its less likely to crackle on the gold and brass targets . if i was looking for silver i would tray to get the KHZ down to 8,4khz but you will notice that gold and aluminum will tend to crackle more so and the silver will not just remember that and give it a try if you elect
