Pattern That Accepts ALL US Coins, Including Gold?

[Critterhunter]

Was wondering if one exists for every known US coin? If not, I may manualy enter all the numbers from the coin chart linked to at the top of the page. Also, opinions on which cursor you'd use and why for depth and rough ground. I may make one with smaalest cursor for high trash, but do you think medium is fine for deep or rough ground?

 

[Jason in Enid]

Just open the entire line from CO 10 to CO 49. If you want gold, you gotta dig a lot of trash.

 

[EZrider]

Andy's coin pattern is about the best your going to find. There is a link up top to Thebeepgoson web page where you can DL it. I have two patterns for the park. Two patterns for the beach, two for relic hunting and one cherry pick coin pattern. All loaded into my ET.

 

[Kenova]

Andy's coin pattern is about the best your going to find.

 

[Nick A]

Entering all the numbers only works if you want to find perfect coin signals. Even air testing, you'll see a coin signal will change as the angle of the coin changes and the distance from the coil changes. Add in ground effects and zoiks! So if you entered 12-47 for example, yes, you will dig a lot of quarters. But, you will also miss a ton of quarters. So, if you think by entering one number you will get all of that type of target, no. It's not that simple. I agree with others that the stock coin program is very good, and Andy's program is very similar - also good. If only there were an easy way to just get only good coin signals and only dig coins...

 

[McDean]

Definitely try opening the screen a little... I was getting an absurd signal at the edge of disc... real iffy but high conduct #.. I opened the quickmask to AM and it cleaned the signal to a sweet sounding 20-46... dug down about 6" and there's a '18 merc dime sitting next to a rusty blob. This is where the etrac shines. I took the merc out of the hole and scanned again, nothing but null...