Frank in NH
Active member
Doing field hunting, which coil will go deeper 11" or 13x11" or do I just get more ground coverage with 13 X 11"?
Find's Treasure Forums
Welcome to Find's Treasure Forums, Guests!
You are viewing this forums as a guest which limits you to read only status.
Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.
Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.
Click here to register!
Need Support Help?
Cannot log in?, click here to have new password emailed to you
Question for the PROS? Coil depth.
- Thread starter Frank in NH
- Start date
vancemetaldetecting.com
Member
The 11" coil is def deeper than the 11x13 frank, and more stable, the 13" was just a poor design very off balance and toe heavy as well as not getting as deep, basically you gain a few inches of coverage area but really that's about it!
The 11" however is deep, very well designed, very well balanced and as far as seperation goes I've never had an 11" coil seperate the way this sucker does! Call me if you have any questions brother I'm always in the mood to talk to an old friend!
Vance
502-262-0356
Here's a few of my programs I love the 007!!
Vance DEUS SETTINGS
Deep coin
disc: 8.0
Sens: 90
Tx power: 3
Freq: 11.7
Iron vol: 1
Reactivity: 2
Silencer: 0
Audio resp: 5
Audio overload: 1
Notch: 97-99
5tones
1) 155 breakpoint 8
2) 300 breakpoint 39
3) 650 breakpoint 56
4) 800 breakpoint 97
5) 155
RELIC 2 TONE PROGRAM (for civil war camps no modern trash)
Disc: 30
Sens: 90 ( high as you can run, if in lots of iron run at 80-85 think of iron like headlights in fog too much light you can't see, too much power the detector can't see through iron)
Tx power: 3 (turn down to 2 in heavy iron)
Freq: 7.8
Iron vol: 2 (turn to 0 if iron noise bothers you)
Reactivity: 3 (run at 4 in heavy iron, run at 2 for more depth)
Silencer: 1 (0 will get more depth)
Audio response: 5 (run 6 or 7 to hear deep faint signals but remember anything above 5 the sound doesn't differentiate for shallow and deep it's all amplified)
Audio overload: 1
Notch: 97-99
3 TONES
1) 157 breakpoint 38
2) 665 breakpoint 45
3) 800 (remember and go to notch and notch 97-99 for wrap around iron)
VANCE MAIN RELIC PROGRAM. (I call this program VANCE 007)
Disc: 10 to 35 (depending on site)
Sens: 95 ( I push sens as high as I can when not in iron, back off to 85 when in heavy iron)
Tx power: 3 (unless heavy iron swap to 2)
Freq: 7.8 (run this program in 4khz for extreme depth,)
Iron Vol: 2 (I like hearing the scratchy noise in the background)
Reactivity: 3 (run at 4 in heavy iron run at 2 for depth)
Silencer: 0
Audio resp: 5
Notch: 97-99
5 TONES
1) 100 breakpoint 10-25
2) 400 breakpoint 35
3) 710 breakpoint 58
4) 800 breakpoint 97
5) 100 (97-99 iron wrap around)
*You can run all of these programs at 4khz for more depth
*If your hunting around power lines run 18khz to get rid of EMI interference however remember at 18khz your TID numbers get high a quarter will hit 95 sometimes
* if you need anything for any machines questions or accessories
Or need a new or used machine cash or trade CALL VANCE 502-262-0356
The 11" however is deep, very well designed, very well balanced and as far as seperation goes I've never had an 11" coil seperate the way this sucker does! Call me if you have any questions brother I'm always in the mood to talk to an old friend!
Vance
502-262-0356
Here's a few of my programs I love the 007!!
Vance DEUS SETTINGS
Deep coin
disc: 8.0
Sens: 90
Tx power: 3
Freq: 11.7
Iron vol: 1
Reactivity: 2
Silencer: 0
Audio resp: 5
Audio overload: 1
Notch: 97-99
5tones
1) 155 breakpoint 8
2) 300 breakpoint 39
3) 650 breakpoint 56
4) 800 breakpoint 97
5) 155
RELIC 2 TONE PROGRAM (for civil war camps no modern trash)
Disc: 30
Sens: 90 ( high as you can run, if in lots of iron run at 80-85 think of iron like headlights in fog too much light you can't see, too much power the detector can't see through iron)
Tx power: 3 (turn down to 2 in heavy iron)
Freq: 7.8
Iron vol: 2 (turn to 0 if iron noise bothers you)
Reactivity: 3 (run at 4 in heavy iron, run at 2 for more depth)
Silencer: 1 (0 will get more depth)
Audio response: 5 (run 6 or 7 to hear deep faint signals but remember anything above 5 the sound doesn't differentiate for shallow and deep it's all amplified)
Audio overload: 1
Notch: 97-99
3 TONES
1) 157 breakpoint 38
2) 665 breakpoint 45
3) 800 (remember and go to notch and notch 97-99 for wrap around iron)
VANCE MAIN RELIC PROGRAM. (I call this program VANCE 007)
Disc: 10 to 35 (depending on site)
Sens: 95 ( I push sens as high as I can when not in iron, back off to 85 when in heavy iron)
Tx power: 3 (unless heavy iron swap to 2)
Freq: 7.8 (run this program in 4khz for extreme depth,)
Iron Vol: 2 (I like hearing the scratchy noise in the background)
Reactivity: 3 (run at 4 in heavy iron run at 2 for depth)
Silencer: 0
Audio resp: 5
Notch: 97-99
5 TONES
1) 100 breakpoint 10-25
2) 400 breakpoint 35
3) 710 breakpoint 58
4) 800 breakpoint 97
5) 100 (97-99 iron wrap around)
*You can run all of these programs at 4khz for more depth
*If your hunting around power lines run 18khz to get rid of EMI interference however remember at 18khz your TID numbers get high a quarter will hit 95 sometimes
* if you need anything for any machines questions or accessories
Or need a new or used machine cash or trade CALL VANCE 502-262-0356
Frank in NH
Active member
To bad I bought the 13X11'' before the new 11" came out. Guess that was money wasted.