Find's Treasure Forums
Welcome to Find's Treasure Forums, Guests!
You are viewing this forums as a guest which limits you to read only status.
Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.
Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.
Click here to register!
Need Support Help?
Cannot log in?, click here to have new password emailed to you
Re-tuned
- Thread starter binger25
- Start date
WV62
Well-known member
I agree with REVIER, I haven't heard of any re-tune process, except for the upgrade on the F75's.
I would say if you have a machine that you think or know has problem you can contact FT and return the machine for a bench check and repair if needed.
Welcome to the forum and tells us more, what detector you have or are thinking about getting.
Ron in WV
I would say if you have a machine that you think or know has problem you can contact FT and return the machine for a bench check and repair if needed.
Welcome to the forum and tells us more, what detector you have or are thinking about getting.
Ron in WV
I've heard of the DD coils being re-tuned. Under the cover at the rear of the 11 x 7 coil are fine-tuning doohickeys (trimmer capacitor and small coil), and they can be re-set again, if the coil is 'out of spec'.
Other than that, the only 'tuning' adjustments inside an F75 are the 'Master Ground Balance' controls, which ensure the TID numbers are correct, and the GB values are consistent (eg. non-mineralised dirt ='90').
Other than that, the only 'tuning' adjustments inside an F75 are the 'Master Ground Balance' controls, which ensure the TID numbers are correct, and the GB values are consistent (eg. non-mineralised dirt ='90').