Suggestion on previous topic: Handle Protection on Explorer or any unit for that matter

[Pete in MI]

Here is an idea to try if you are interested. Seems like it would work fairly well.

[attachment 52254 Tape.jpg]

This tape - besides being made in the USA - is a self-sticking tape - it sticks to itself - not to the object (handle).

As the instructions note you could use a clean pad (gauze or maybe one of those pantyliners) under the tape for additional protection.

Imagine going out and getting the handle 'tape' filthy with dirt and grim and just unwinding it and tossing it in the trash. Quick clean up and the foam left nice and clean. The tape also would give addtional gripping.

[attachment 52310 Handle.jpg]

 

[Pete in MI]

[attachment 52308 vetcolor_web.gif]

These are just some of the colors available. There is even some with paw prints for the animal lovers:

[attachment 52309 VetWrapColoredPaws.jpg]

Other uses could be using it to completely wrap the coil cable to the lower shaft or higher to keep small saplings, and other vegetation from snagging onto the cable.

Could be used to identify your detector in a group of other similar detectors when detecting with a group of others. No embarrasing moments telling someone they picked yours up by mistake only to find out it isn't yours after all.

If they make a camoflage wrap - and am sure somewhere there is one - you can do most of your detector and be less noticeable...just don't lay it down and forget where ya put it.

Might even use it to protect your probe and extend its life.

Just some thoughts..what do you think or do you have any ideas for additional use of the wrap in relation to detecting?

 

[mtpockets]

Pretty interesting stuff there...

Be-carful using Camo... I "HAD" a Very Nice Laser Range Finder that I "Used" while hunting....

I took them off as I was heading back to camp driving a Quad.... I saw something fall as I was riding I went to turn around to see what it was and ....

I couldn't Find them..... "Camo" out $400.00 +


But I wonder how it would look Camoed out..
http://www.camoextreme.com/

 

[WThesing]

Just my $.02.

I am one that likes to care for my detectors just like a fine firearm. I clean my Exp. II's after each use. My 1 1/2 year old machines look brand spanking new. One of my peeves in the beginning was the handle grip foam was hard to keep clean after much contact with my dirty paws after digging a few holes. I found that a jet of compressed air from my shop compressor cleans up the handle foam as long as it is dry. A wipe of WD 40 on the carbon fiber lower rod keeps it collapsing or extending smoothly, but better yet, a coating of a decent car wax. I do not use petroleum products on the plastic housing, screen, or upper arm. Some good multi purpose cleaner and a soft cloth works great. I use the fitted cover as a screen protector, and would rather spend another $10.00 when it has reached its service life. You can purchase plastic film covers that will stick to the screen at computer / office supply retailers. Just cut to size. They use NO adhesives, and are just like the peel off protectors supplied with lots of electronics when shipped.
I use a microfibre lense cleaning cloth to wipe the screen when needed, and keep a couple in my detector bag. They can be laundered when necessary, and are used for fine optics. Will not scratch if kept clean.

Getting caught in rain? or want a little xtra protection at the beach?

Use the WIDE rubber bands like you get with a fresh lobster as "gaskets" above & below control box. Use a good quality "ziplock" type bag over box, and neatly duct tape it to the rubber bands. Then use a nylon cable tie over each duct taped seal. I haven't had a drop of water get thru this yet. You can also make a plastic foam plug coated with plumbers "Goop" as a seal inside the upper end of the lower rod so that water does not travel thru. You can "goop" the upper section behind the plug as well. "Goop" unlike silicone caulk, is an RTV adhesive and sealant. I prefer the Marine or Plumber's formula. Available at all "home center" stores.