kaolinwasher
Well-known member
I want to give credit to TNsharpshooter. for revealing this to me , He has made some videos on the masking of coins, or as he says cones, so I got my Orx and began to mess with the setting and this is what i came up with 65 gain works best because it mellows out the iron and still gets good depth , 17.2khz for some reason this higher frequency hits the target the best . but even at 12khz the coin starts comming thru. but not as good as the 17.2 and a must is the reaction speed 2.5 or 3 i like 2.5 as it gives a bit better depth and sound ,Disc 5.5 and 6 if its above 6 the masked coin will not be heard by the ORX and i assume the deus 1 at 2 reaction you will not hear the coin , I was using a dime at 1.5" depth under a lawn mower pin. also you will get a good sound but the ID will show 06 not a 91 that the dime makes so you are going by sound , try this setting to unmask coins in hunted out spots It also works in gold program fine gold ,65 gain, 2 IAR, 2.5 recover 17.2hz