Find's Treasure Forums

Welcome to Find's Treasure Forums, Guests!

You are viewing this forums as a guest which limits you to read only status.

Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.

Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.

Click here to register!



Need Support Help?

Cannot log in?, click here to have new password emailed to you

using target id stability.

pinpointa

New member
:ausflag:
Hi Guys,
Using the exterra 70 with the 7.5khz coil and putting target id stability on was ok with $1.oo AND $2.oo coins coming in at 32 & 30 . But i changed the coil to a 18.75 khz.dd. the numbers were a bit higher and fluxuating so by removing target id stability it brought it back to being stable again. problem solvered :thumbup:
 
I get the same readings on $1 and $2 with my Elliptical DD as my stock concentric.......the only times I have had different readings in the past was due to moisture or how long the coin had been in the ground etc etc. 28's on the $2's and 34's on the $1's. Apart from that, different coils but all the same readings for me.
Cheers!
 
:ausflag:
Hi nugget 71
I am getting the same numbers on the stock concentric coil as on the elliptical dd but by taking off id stability on the dd coil this is putting the coins on top of the ground in the same place and changing back to the concentric stock coil which has target id stability on. What i have found lately i have dug quite a few $2.oo & $ 1.oo at 28 and 34 but quite a bit deeper and a bit on there side.
Regards Pinpointa down under in oz.:thumbup:
 
n/t
 
Top