Went back

[markg]

Changed a few settings and went back to an area I had previously covered with my F75 and guess what?
All these were 6"+ in depth

 

[osgood]

Way to go, how radical where the setting changes?

 

[dgc]

What settings did you change? I am working with a test garden fringe depth clad dime and actually believe I am getting a more consistent audio tone on the dime by setting the ground balance number at 3 to 4 units below where fast grab sets the detector. Most recommend setting GB 3 to 4 units above the fast grab number. It seems to me that setting GB below the fast grab number is making the detector less sensitive to ground minerals which in turn makes the dime signal to be less influenced by the surrounding ground. I am doing this testing in discriminate mode, bP process, 60 sens, 4 disc, 4 tones. I've only done this a couple of times so I definitely wouldn't reach any conclusions on anything at this point.

 

[jim tn]

WOW, that is a great "went back" hunt. I'm sure you will "went back" again WTG! HH jim tn

 

[markg]

This site had been previously hunted with the following settings:
DE
Sens 85-90
Disc 5-6
4H

This time
DE
Disc 0
4H
Sens ended up at 75 (right before chatter)
Fantastic hunt for me.
Very quiet while the coil was in the air, but a lot of chatter and iron grunts while swinging.

 

[pescadore]

Looks like the adjustments are working out for you !! I would keep going back until I didn't find anything if I was still finding good stuff like that. HH

 

[Cal_Cobra]

Very nice, looks like you have a great area

 

[tvr]

Found a good spot Mark. Nice coins!

 

[Steve2021]

Cool finds amazing what different settings can do for ya.