Find's Treasure Forums
Welcome to Find's Treasure Forums, Guests!
You are viewing this forums as a guest which limits you to read only status.
Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.
Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.
Click here to register!
Need Support Help?
Cannot log in?, click here to have new password emailed to you
Will this older compass coil fit on the scanner series?
- Thread starter Eric
- Start date
Old California
New member
Hello Eric,
Yes, The nugget/probe coil will work on the Scanner series.
I have one identical to the one in your picture, They will work on your detector and I've included another picture of other Compass coils that will also work on the Scanner series.
This next paragraph is not related to the coil question but related to another question you had further down below on boosting the Scanner series sens.....
Don't worry about boosting up the sensitivity on your Scanner, Keith Wills can boost the sens up a bit and it does increase depth but in some cases some ground will not allow the extra sensitivity depending on the area you live...Just a thought and the extra boost may work for your area but in some cases the extra sensitivity isn't necessary....With the stock setup just crank up the sens, That should be plenty enough.....What you're looking for is sepration in areas full of iron which the Scanner series do well so too much sens will do no good, But extra depth is good too out in the cleaner areas
HH, Paul
Yes, The nugget/probe coil will work on the Scanner series.
I have one identical to the one in your picture, They will work on your detector and I've included another picture of other Compass coils that will also work on the Scanner series.
This next paragraph is not related to the coil question but related to another question you had further down below on boosting the Scanner series sens.....
Don't worry about boosting up the sensitivity on your Scanner, Keith Wills can boost the sens up a bit and it does increase depth but in some cases some ground will not allow the extra sensitivity depending on the area you live...Just a thought and the extra boost may work for your area but in some cases the extra sensitivity isn't necessary....With the stock setup just crank up the sens, That should be plenty enough.....What you're looking for is sepration in areas full of iron which the Scanner series do well so too much sens will do no good, But extra depth is good too out in the cleaner areas
HH, Paul
Old California
New member
Eric,
If you need an owners manual for the GoldScanner Pro I can make a copy and send it to you, Let me know if you need one?
HH, Paul (Ca)
If you need an owners manual for the GoldScanner Pro I can make a copy and send it to you, Let me know if you need one?
HH, Paul (Ca)
Old California
New member
Your so Welcome!
What ever you do never sell off your GoldScanner Pro! You'll regret it as many that do eventually sell off theirs kick themselves repeatedly.
Try getting the thin-line 6.5" inch coil, That's all the coil you'll ever need with the GoldScanner. Makes the unit so much lighter and less fatigue on the arm, And it gets equal or almost the same depth as the 8" coil.
HH, Paul (Ca)
What ever you do never sell off your GoldScanner Pro! You'll regret it as many that do eventually sell off theirs kick themselves repeatedly.
Try getting the thin-line 6.5" inch coil, That's all the coil you'll ever need with the GoldScanner. Makes the unit so much lighter and less fatigue on the arm, And it gets equal or almost the same depth as the 8" coil.
HH, Paul (Ca)
Thanks