Wiring undone

[RodH]

i have 3 wires that have come undone on my plug for the coil. Is a "bud"1 detector. Has 5 wires and are numbered. The 3 still has green wire attached and the 5 has the uncoated wire. Leaves 1 2 and 4 for a Red White and Black. Thanks for any help.

 

[BH-LandStar]

Wow!...I am an electronics technician and I cannot tell you the answer to that one without a coil to cut open, or a schematic...Any Repair Techs on the forum???
I would give the manufacturer a buzz and see if they can help you out...

BH-LandStar

 

[RodH]

It is a Bounty Hunter... I will try to write them Thanks

 

[BH-LandStar]

Bounty Hunter is usually good...Convince them your the original owner and that you have had the detector under normal use...They may offer to replace the coil for you...Never hurts to ask though.

BH-LandStar

 

[jeff@middlesex]

Here is a pic of bh pin wiring looking directly at the connector. the uncoated wire would go with one of the black pin wires, sorry about the pic

 

[RodH]

Thank you so much Jeff. I soldered them into place at work today and working flawless. And was excellent drawing by the way. Great site here and sorta glad i had a problem so could find it. Thanks for all your help. Rod

 

[BH-LandStar]

Great Pickup Jeff, and I have added the pic to my notebook for future reference...

Thanks,

BH-LandStar