Find's Treasure Forums

Welcome to Find's Treasure Forums, Guests!

You are viewing this forums as a guest which limits you to read only status.

Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.

Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.

Click here to register!



Need Support Help?

Cannot log in?, click here to have new password emailed to you

Changed email? Forgot to update your account with new email address? Need assistance with something else?, click here to go to Find's Support Form and fill out the form.

Anyone modify a vanquish making it waterproof yet?

well it wont fit in the setup i had planed
back to the drawing board
 
I plan to try . It won't be completely waterproof, but should work for shallow water wading. Plan is as follows:

1) extend the coil cable to 7 ft. ( bought the connectors and cable ...need to solder them yet, waiting to make up a soldering gig)
2) disconnect the control box and throw it in a small back-pouch , ( so detect by sound only)
3) get a straight shaft handle and attach it to the Vanquish shaft ( need someone to 3D print the handle......any suggestions?)
The major obstacle now, is to find a handle #3 above.

Ken
 
I was curious if anyone has rebuilt a vanquish to make one waterproof yet l.

it would be interesting and a very cheap unit to do so with.
the vanquish control box looks like it could be put together like the ace 150 to which I made a water hunting detector. not really water proof, ill explain. I bought a straw pit helment used a four AA battery holder. kind with two battery on each side. mounted on one side of the hat I disconnected the face plate from the battery holder part of the ace 150. only had to cut the speaker wires. mounted the faceplate part of the detector to the other side of the hat. then used a small pair of headphones inside the hat then hooked everything together. used solid hair net to cover the hat. I bought extra cable from garrett Spliced the extra cable, used silicon an heat swank to waterproof the splice. anyway you get the idea. It worked good. Found a lot of gold jewelry in fresh water. the vanquish, an the ace control boxes looks a lot a like, but I couldn't say how the vanquish would look if you disconnect .the face from the battery holder an speaker part. but I bet it would be a lot a like. any way just a thought.
 
Just a thought? You have given more detail than most ... great ideas on completing a project like this ... Thanks for putting your thoughts on this to pen on paper so to speak
 
Just a thought? You have given more detail than most ... great ideas on completing a project like this ... Thanks for putting your thoughts on this to pen on paper so to speak
I just used extra wire to go from the battery holder to the other side of the hat, by going inside the hat up to the top, then back down the other side to the control box. mostly comes down to just thanking it threw.
 
well i finely got around to waterproofing my vanquish 440
it came out great i had a 200 series otterbox (they don't make these anymore)
& used ge silicone & pvc extensions for the cables
& a nokta battery holder
its gonna work fine for me i only go in 6 feet of water
this has been a great detector a real ring finder ..
 

Attachments

  • IMG_20221216_162453883.jpg
    IMG_20221216_162453883.jpg
    2.2 MB · Views: 169
  • IMG_20221216_130857408.jpg
    IMG_20221216_130857408.jpg
    2.1 MB · Views: 170
  • IMG_20221216_130851718.jpg
    IMG_20221216_130851718.jpg
    2.3 MB · Views: 154
  • IMG_20221216_130844900.jpg
    IMG_20221216_130844900.jpg
    2.3 MB · Views: 147
  • IMG_20221216_114850385.jpg
    IMG_20221216_114850385.jpg
    2.6 MB · Views: 145
  • IMG_20221216_102038817.jpg
    IMG_20221216_102038817.jpg
    2.3 MB · Views: 169
ty im almost finished will post pix soon
 
its done just need to add some black paint on the pvc extensions :cool:
 

Attachments

  • IMG_20221218_123140241.jpg
    IMG_20221218_123140241.jpg
    2.7 MB · Views: 127
  • IMG_20221218_123146161.jpg
    IMG_20221218_123146161.jpg
    2.1 MB · Views: 118
pelican has a box like this but theres is only good to 3 feet for 30 min
 
Top