joe dirt_1
Active member
I got to spend an hour or so out hunting with my new Omega this afternoon. Was using the 11" coil with sensitivity at 70, disc at 16, and d3 tone and hunting in an area that I have hunted hard before. I found 2 clad quarters, 3 clad dimes, and 3 pennies with the Omega. Nothing impressive, but just to find a few coins in this spot is doing pretty good since it is loaded with iron.
The Omega seems to love round targets.....dug a couple of old round pieces of iron that were about quarter sized and it gave accurate depth readings on the targets. Coins locked on good and the ID was right on the money. One signal sounded like there might be a pocket spill as I swept over the target
and it ended up being 2 quarters and 1 dime and 1 penny that I was hearing. The Omega was giving me multiple hits and it was correct.... 4 coins in the spill. I was impressed with the speed of the Omega and its ability to seperate targets.
The detector is very simple to operate and to set up. No fumbling with menus and programs here and I like that. It ground balanced at 60 and was very easy to do. Pin pointing with the 11" coil was simple and my targets were always in my plugs. I figured I would have some trouble pin pointing with the coil since I'm not used to using a DD coil, but that wasn't the case.
All in all, I like the Omega so far. I'm still learning the machine but I'm confident that if there is a coin in the ground within the Omega's reach it will find it. I liked the shape of the grip handle.... it fit the hand very nice and tilts the meter forward just enough to where it is easy to read. This sounds like a minor feature but I wish all detectors were designed with this style grip.
Since this is my first detector from First Texas I did notice a huge difference in build quality from the Los Banos made Fisher detectors I'm used to using. The Omega doesn't feel nearly as rugged as the old detectors, but I think with reasonable care it will hold up fine. For manicured lawns and sports fields
it should be a great coin and jewelry hunter. If the rain holds off I'm going out tomorrow to a couple of other sites to see how the Omega performs............HH
Roger
The Omega seems to love round targets.....dug a couple of old round pieces of iron that were about quarter sized and it gave accurate depth readings on the targets. Coins locked on good and the ID was right on the money. One signal sounded like there might be a pocket spill as I swept over the target
and it ended up being 2 quarters and 1 dime and 1 penny that I was hearing. The Omega was giving me multiple hits and it was correct.... 4 coins in the spill. I was impressed with the speed of the Omega and its ability to seperate targets.
The detector is very simple to operate and to set up. No fumbling with menus and programs here and I like that. It ground balanced at 60 and was very easy to do. Pin pointing with the 11" coil was simple and my targets were always in my plugs. I figured I would have some trouble pin pointing with the coil since I'm not used to using a DD coil, but that wasn't the case.
All in all, I like the Omega so far. I'm still learning the machine but I'm confident that if there is a coin in the ground within the Omega's reach it will find it. I liked the shape of the grip handle.... it fit the hand very nice and tilts the meter forward just enough to where it is easy to read. This sounds like a minor feature but I wish all detectors were designed with this style grip.
Since this is my first detector from First Texas I did notice a huge difference in build quality from the Los Banos made Fisher detectors I'm used to using. The Omega doesn't feel nearly as rugged as the old detectors, but I think with reasonable care it will hold up fine. For manicured lawns and sports fields
it should be a great coin and jewelry hunter. If the rain holds off I'm going out tomorrow to a couple of other sites to see how the Omega performs............HH
Roger