kaolinwasher
Well-known member
I use the XP -ORX and have a X-35 coil on it I chose to keep it over the Deus, - well I have been testing on the many frequency's available on the ORX in order to find Gold rings , and this is what i found , 15.2khz is the best for gold , getting white gold yellow gold and low caret gold , and 14 k 18k, and also nickles one program i was using today is the 2nd Gold program called fineGold and using it with the 15.2 khz and a 2 recovery speed which is crucial for making the iron give itself away and getting you deep , but the gold really hits hard - I run the IAR at 4 and no bottle cap will fool you some iron will make a mid tone if its big and be stressed and hyper , but the tabs and nickle s give a cleaner sip sound today i went over a small area, i had hunted many time s and it was very clear to me this was pulling out the nickles, as all where deep and had set in the ground for some time . go ahead and try it out . I was using on an 80 gain but it is one of my favorite programs