Headphones

[sharkbait]

I got my CTX used. It came with headphones that had to be plugged in but included the wireless module so I ordered a pair of Koss headphones that are the same as the ones included with purchase but even though I hear it the start up tones in the phones when I plug them in, the signals continue to only be audible through the detector speakers instead of the head phones. Is their something I'm not doing or how do I get this corrected? Also how does one put batteries into the wireless module? I did not receive an owners manual.

 

[tiftaaft]

Hi Sharkbait. Here is a link to the owner's manual for the ctx.

https://www.google.com/url?sa=t&source=web&rct=j&url=https://www.minelab.com/__files/f/116626/4901-0117-4%2520Inst%2520Manual,%2520CTX%25203030%2520EN.pdf&ved=0ahUKEwiVl6vXxqPWAhUpsVQKHVsJBb0QFgglMAA&usg=AFQjCNH-WZOmXCdcCuItDur4qn3OCCQM0w

 

[tiftaaft]

Sorry, I hit post early. The wireless headphone module charges by using a usb cable connection to a power source. The cable should have been included in the box.

I believe headphones plugged directly into the machine need to have a stereo connector to deactivate the external speaker, but for sure, with the WM-10 module connected, you should be able to use any headphones and the external speaker will be turned off.

Hope that helps, let me know if you have any other questions.

Tim

 

[sharkbait]

Thanks. I saw immediately on page 53 what I need to do.