Find's Treasure Forums

Welcome to Find's Treasure Forums, Guests!

You are viewing this forums as a guest which limits you to read only status.

Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.

Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.

Click here to register!



Need Support Help?

Cannot log in?, click here to have new password emailed to you

Changed email? Forgot to update your account with new email address? Need assistance with something else?, click here to go to Find's Support Form and fill out the form.

Help with coil plug

I bought an 8" 4-pin coil for my Compadre and wired it up only to discover later that the Compadre needs the 5-pin coils instead. Like an idiot I did not diagram the wire connections on the 4-pin plug, so now I cannot put the plug back on properly.

The outside of the plug pins is numbered 1,2,3,4 and the cable wires are green and red with each wire having two conductors...one insulated center lead and one outside "braided" style shield wire. If anyone has one of these plugs and can just slide the plug out of the housing and tell me what wire goes to what number I would be greatly appreciative.

Cheers.
 

shen13

New member
Maybe this helps//

Pin 1 = Orange
Pin 2 = *not used
Pin 3 = Purple
Pin 4 = Grey
Pin 5 = Ground/Shielding (center pin)
 
Thanks "shen13" but that is the 5-pin plug, which is not what I need. I need for the 4-pin plug coil...where all the pins are used.
 
Top