Help with coil plug

[Arthur-Canada]

I bought an 8" 4-pin coil for my Compadre and wired it up only to discover later that the Compadre needs the 5-pin coils instead. Like an idiot I did not diagram the wire connections on the 4-pin plug, so now I cannot put the plug back on properly.

The outside of the plug pins is numbered 1,2,3,4 and the cable wires are green and red with each wire having two conductors...one insulated center lead and one outside "braided" style shield wire. If anyone has one of these plugs and can just slide the plug out of the housing and tell me what wire goes to what number I would be greatly appreciative.

Cheers.

 

[shen13]

Maybe this helps//

Pin 1 = Orange
Pin 2 = *not used
Pin 3 = Purple
Pin 4 = Grey
Pin 5 = Ground/Shielding (center pin)

 

[Arthur-Canada]

Thanks "shen13" but that is the 5-pin plug, which is not what I need. I need for the 4-pin plug coil...where all the pins are used.

 

[BeyWolf]

This might help.