Nokta Detectors
Active member
https://www.youtube.com/watch?v=_H755cBRizo
You are viewing this forums as a guest which limits you to read only status.
Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.
Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.
Cal_Cobra said:There are release notes on the update page:
The update is now posted on the Makro website:
Kruzer Firmware Update Page
Basically in 3-TONE mode they adjusted the iSat level during GB, which was already noted in the user manual, but people complained about it, so they do it automatically now. Also a couple of other changes:
Updates Made :
* The iSAT level in GEN mode while ground balancing in 3-TONE mode has been adjusted to level 4 automatically.
* The display time of the depth indicator has been increased.
* Constant "Lo" battery warning has been changed to a blinking one.
HH,
Cal (aka trash mouth)
\"Carolina\" said:There are release notes on the update page:
The update is now posted on the Makro website:
Kruzer Firmware Update Page
Basically in 3-TONE mode they adjusted the iSat level during GB, which was already noted in the user manual, but people complained about it, so they do it automatically now. Also a couple of other changes:
Updates Made :
* The iSAT level in GEN mode while ground balancing in 3-TONE mode has been adjusted to level 4 automatically.
* The display time of the depth indicator has been increased.
* Constant "Lo" battery warning has been changed to a blinking one.
HH,
Cal (aka trash mouth)
Hahahahaha " Trash mouth " good one!!!
GroundHug said:A couple of things to note
If you already have the update program for your impact installed you will have to uninstall it before you can install this one. Dont worry as you can choose which machine to update in the new app it works for both
You must follow the steps given in the exact order for this to work just follow the steps given on the app screen in the order they are listed
Hope this helps
Cal_Cobra said:Question for those that have performed the upgrade - The Impact upgrade app would wipe all your settings back to factory defaults, so you'd loose all your custom settings. I assume the Kruzer app does as well?
Charles (Sabre)(Tx) said:Did the update...it took me a while being so darn dumb with computers (LOL).
But it worked for me! I've definitely seen an improvement in the display time on the depth indicator.
Might just be me...but it seems a bit less "chatty" too.
Thanks Makro/Nokta!
Charles