my deep coin program hitting 12 inch silver coins.

[calabash digger]

[video]https://youtu.be/0vza9S2V7Lg[/video] Is this the deep coin program your looking for? part 1 there are 2 parts to this video the other is with the 11 inch coil

 

[Frank in NH]

You say you were using the relic mode to set this program up, did you leave disc. the way it is or change it? Thank you!

 

[calabash digger]

I was using my relic program not the stock one, I keep disc at 1 on my custom program. check out the video where I negative ground balance it it really tags them then.

 

[Frank in NH]

Which stock program did you start loading your own settings? I started with the relic and loaded your settings seems to work pretty good.

 

[calabash digger]

probaly deus fast but it doesnt matter which one either will work the end result is the same. Have you tried the settings in the field? If the the machine is chattery can lower the tx down to 2 it helps some and will save the batteries.you were correct about woodchiphustler great guy. thanks

 

[digsgti]

Bottom line for deep target recovery with the Deus is to turn the silencer down. I'm hoping that the upcoming software update will make the silencer setting less submenued. Also keep it from changing on its own when you mess with other settings.

 

[calabash digger]

from -1 to 0 not much of a difference but from 0 to 2 a big difference in performance on deep targets in my testing.

Bottom line for deep target recovery with the Deus is to turn the silencer down. I'm hoping that the upcoming software update will make the silencer setting less submenued. Also keep it from changing on its own when you mess with other settings.

 

[bigelow]

Thanks for sharing I tried this a little bit this morning!