I am trying to set up user profiles. I understand that I can set up 4 user profiles for each category of search .. so in theory .... 4 user profiles in "field mode", 4 user profiles in "park mode", 4 user profiles in "beach mode", and 4 user profiles in "gold". The problem is after I set up a user profile in number user profile 4 in the "field mode" (no problem). When I switch to "Park Mode" my user 4 setting are gone. If I go back to "Field mode" the setting are there. How do I set up separate user profile 4 in "park."... no matter what I do the original setting (#4 in the field mode)....gets deleted. Are there step-by-step instructions to properly set up a different "number four" user profile in each of the modes? I am definitely missing something here
Find's Treasure Forums
Welcome to Find's Treasure Forums, Guests!
You are viewing this forums as a guest which limits you to read only status.
Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.
Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.
Click here to register!
Need Support Help?
Cannot log in?, click here to have new password emailed to you
Changed email? Forgot to update your account with new email address? Need assistance with something else?, click here to go to Find's Support Form and fill out the form.
Nokta Legend User Profiles - Need Help
- Thread starter ZenZig
- Start date
JCR TX
Well-known member
You need to put in the settings you want for each mode, Park, Field, Beach & Goldfield for each User Profile. You should also highlight the Save checkbox for each User Profile.
One thing that a lot of people do not realize is that you can have different tone breaks, tone volumes, tone pitch for each number of tones(2,4,6,60&P) That is a lot of saved settings ready to use. No other detector comes close to the Legends configurability.
One thing that a lot of people do not realize is that you can have different tone breaks, tone volumes, tone pitch for each number of tones(2,4,6,60&P) That is a lot of saved settings ready to use. No other detector comes close to the Legends configurability.
JCR TX
Well-known member
No, I can't really do that for you. The best way is to re read the User manual & figure it out for yourself so you understand it for yourself. The Legend always retains the last settings you put in automatically Make sure the User Profile screen has the man's little box check marked..
Short video maybe this will help.
Google this: Nokta makro smf the legend How to User Profile settings
oldkoot
Well-known member
Where are you located
I can help you with this if you would like I can PM you my number and get you taught in a few minutes on the phone, which is easier then trying to explain it in typing, it really is not that difficult to save custom user setting
if you have the ability to do a video call would be even better
Hello
Sorry for the slow response. Turned out that is was a lack of resetting the machine after the update. After the reset, everything worked as expected. It was not just a reset though...I had to reset it prior to the update and then again after. Not a big deal but a little quirky. Never would have done that if it was not mentioned here...Thanks!
Sorry for the slow response. Turned out that is was a lack of resetting the machine after the update. After the reset, everything worked as expected. It was not just a reset though...I had to reset it prior to the update and then again after. Not a big deal but a little quirky. Never would have done that if it was not mentioned here...Thanks!