Hi All,
I have two bad batteries (flashing red led on charger) from the original set (1.2v 2400mAh Duracell's) that came with the machine. However I got the machine used so I have no idea how many cycles the remaining 6 have been through.
I checked back on the forum and found a thread from 2014 on Batteries and the ATX which is very informative. From this thread it looks like you can use NiMH batteries with many different mAh ratings in the ATX?
I found some 1.2v - 2500mAh Duracell's at the store for around $12 for a 4 pack. The guys at the battery store wanted to sell me their brand and they may have been 2600 or higher.
Anyway just wanted to check and see if these higher mAh rated batteries were OK to run in the ATX and can be charged on the Garrett charger?
Thanks for the help
HH
I have two bad batteries (flashing red led on charger) from the original set (1.2v 2400mAh Duracell's) that came with the machine. However I got the machine used so I have no idea how many cycles the remaining 6 have been through.
I checked back on the forum and found a thread from 2014 on Batteries and the ATX which is very informative. From this thread it looks like you can use NiMH batteries with many different mAh ratings in the ATX?
I found some 1.2v - 2500mAh Duracell's at the store for around $12 for a 4 pack. The guys at the battery store wanted to sell me their brand and they may have been 2600 or higher.
Anyway just wanted to check and see if these higher mAh rated batteries were OK to run in the ATX and can be charged on the Garrett charger?
Thanks for the help
HH